วันพุธที่ 18 สิงหาคม พ.ศ. 2553

Choosing the best voicing

Each chord can have several different voicings. A voicing is the same chord but with a rearrangement of the notes (which means you'll also have to rearrange your hand and finger position). For each individual chord, this book gives you four voicing to choose from....you're welcome!

Building to scale

    The notes of a chord can also be determined by assigning a numeric Formula, indicating the tones used from the major scale. For example, based on the C major scale, 1-b3-5 would mean play the root (C), a flatted third (Eb), and the fifth (G)-a C minor chord!

    The chart below is a construction summary of the chord types in this book (based on the key of C only):




Note: Since the guitar has only six strings, certain notes must sometimes be left out. And sometimes certain other notes are "doubled" (played twice). In general, the fifth and root are the first two pitches omitted when necessary.

One step further

Building chord is easy - simply add intervals to the root. The type of intervals used determines the resulting chord type. Let's start by learning some basic three-note chords built on a C root:


         
Major chords contain a M3 and a P5 on the root.








Minerr chords contain a m3 and P5 on the root.






Once you're familiar with basic chord types, tons of other chords can be built simply by adding, subtracting, augmenting, or diminishing intervals.

วันอังคารที่ 17 สิงหาคม พ.ศ. 2553

Interval,Abbreviation,Steps,Pitches

Review the following chart and get to know all of the interval types.....



Note : As with sharps and flats , some intervals may sound the same but be written two ways (for example,    aug4 and dim5). Notes or intervals that sound the same but are written differently are called enharmonic equivalents.

Everything's relative

 Intervals come in many shapes and sizes, but in only five categories: major, minor, perfect, augmented and diminished.

 Here's how the categories are related:

 

A major interval lowered one half step equals a minor interval.








A major or perfect interval raised one half step equals an augmented interval.









A perfect interval lowered one half step equals a diminished interval.





  An interval's type is determined by the number of steps between the two notes.

Building chords

  Chords are built from simple "building blocks" called intervals. An interval is the distance between any two notes. Here's a look at the basic intervals, using C as a root:



Notice that these intervals are divided into two groups - major (M) and perfect (P). EASY TO REMEMBER: 4ths,5ths,octaves and 11ths are prefect; all other intervals are major.



วันจันทร์ที่ 16 สิงหาคม พ.ศ. 2553

What's a chord?(Get organized...)

A chord symbol tells us two things about the chord - root and type
  1. The root gives the chord its name. For example , the root of a C chord is the note C. Unlike trees , however , the root note is not always at the bottom of the chord. Notice the difference in these two types of C chords.
  
    2. The chord's type is indicated by a suffix ( m , 7 , sus , maj9 ) There are lots of chord types and suffixes , but there's no need to panic - with a little practice , they're easy to recognize . This book groups all the chords by their type , so keep this list handy :


     of course, you may run across other types of chord from time to time , but the ones listed above are the most common.

การจับและการดีด

ก่อนที่เพื่อนๆจะฝึกแบบฝึกหัด ลองมาอ่านเรื่องนี้กันก่อนคับ


     เมื่อเพื่อนๆเลือกปิ๊คที่เหมาะสมกับตัวได้แล้ว ก็มาว่ากันถึงวิธีการจับและการดีดบ้าง โดยส่วนตัวขอแนะนำให้จับตามแบบที่เพื่อนๆถนัดจะดีที่สุด หรือไม่ก็จับปิ๊คแบบสบายๆ เอาไว้ระหว่างนิ้วโป้งและนิ้วชี้ คือไม่ต้องออกแรงในการจับปิ๊คให้แน่นนัก แล้วก็ไม่ใช่หลวมจนปิ๊คหลุดนิ้วบ่อยๆ เวลาดีดก็ให้จับปิ๊คเอียงทำมุมกับสายกีตาร์ประมาณ 45 องศา วิธีนี้จะช่วยให้ปิ๊คสามารถที่จะข้ามสายไปได้ง่ายและรวดเร็วขึ้น ส่วนนิ้วมือที่เหลืออีกสามนิ้วนั้น จะกำเอาไว้หลวมๆหรือเหยียดออกไปก็ได้ทั้งนั้น ขณะที่ดีดก็ให้ใช้สันมือเป็นจุดหมุน โดยการวางสันมือลงบนสะพานสายช่วงบนๆ(ประมาณสาย 4 กับสาย 5 ) ซึ่งเพื่อนๆอาจจะวางมือทับโดนสายบ้างเล็กน้อยก็ไม่เป็นไร (แต่ไม่ใช่วางทับสายมากซะจนดีดออกมาเสียงบอดหมุนทุกเสียงนะคับ) การวางสันมือลงไปนี้จะช่วยให้เพื่อนๆดีดได้เร็วและแม่นยำขึ้น เพราะสันมือที่วางลงไปนี้จะช่วยพยุงมือเอาไว้ การควบคุมนิ้วจึงเป็นไปอย่างมากไม่ลำบาก และแน่นอนเมื่อการควบคุมนิ้วที่ใช้ดีดดีขึ้น ความเร็วในการดีดก็จะเพิ่มขึ้นด้วย

คำแนะนำสำหรับการอ่านโน้ต EP.2


  • Pull off ( พูลออฟ ) ตัวย่อ P - ให้เล่นโน้ตตัวแรกเหมือนปกติ จากนั้นให้ใช้นิ้วมือเกี่ยวออกให้ได้โน้ตอีกตัว(ที่เสียงต่ำกว่าบนสายเดียวกัน) โดยไม่ต้องดีด
  • Hammer on( แฮมเมอร์ออน ) ตัวย่อ H - ให้เล่นโน้ตตัวแรกเหมือนปกติ จากนั้นให้ใช้นิ้วมือเคาะลงไปให้ได้โน้ตอีกตัว (ที่เสียงสูงกว่าบนสายเดียวกัน)โดยไม่ต้องดีด
  • Silde (สไลด์) ตัวย่อ S - ให้เล่นโน้ตตัวแรกเหมือนปกติ จากนั้นให้ใช้นิ้วมือรูดไปหาโน้ตอีกตัวให้เกิดเสียงโดยไม่ต้องดีด
  • ส่วนสัญลักษณ์บน Tab ที่คล้ายๆตัว V คือ ให้ดีดสายในจังหวะขึ้น(ดีดขึ้น)
  • ส่วนสัญลักษณ์บน Tab ที่คล้ายๆตัว n คือ ให้ดีดสายในจังหวะลง (ดีดลง)

วันอาทิตย์ที่ 15 สิงหาคม พ.ศ. 2553

คำแนะนำสำหรับการอ่านโน้ต EP.1


      สำหรับการฝึกกีตาร์โดยทั่วไปแล้วจะนิยมอ่านจาก Tab เป็นส่วนใหญ่ เนื่องจากกีตาร์เป็นเครื่องดนตรีที่มีเสียงหลายระดับ การจะเล่นโดยการอ่านจากตัวโน้ตเลยบางครั้งก็ลำบาก ถ้าไม่ได้เรียนหรือฝึกการเล่นแบบคลาสสิกมาก่อน ซึ่งตัวเลขที่อยู่บน Tab จะบอกเฟร็ตที่ต้องกดสาย ส่วนเส้นทั้ง 6 เส้นจะใช้แทนสายกีตาร์ทั้ง 6 สาย โดยเส้นบนสุดจะใช้แทนสาย 1 ส่วนเส้นล่างสุดจะแทนสาย 6


Notice

  • Tab ( tableture หรือ TAB )
  • 8va คือ เล่นโน้ตให้มีเสียงสูงกว่าที่เขียน 1 ออคเทฟ (เครื่องหมายนี้ไม่มีผลกับ Tab )
  • Loco คือ ให้กลับไปเล่นโน้ตตามเสียงจริง (หลังจากที่ถูกแปลงโดยเครื่องหมาย 8va)